←  Tutorials

Fallout Studios Forums

»

Create a river

nip's Photo nip 17 Mar 2008

1. Layout the river bank and the default water polygon.
Posted Image

2. Use the 'Water Tool' to add waypoints to the water polygon. Move the water tool cursor over the water polygon and click when a '+' appears at the cursor. A waypoint is added to the polygon. The speed of the water flow depends on the amount of waypoints added to the water polygon. More waypoints = short distance between waypoints = slow water flow, less waypoints = greater distance between waypoints = fast water flow.
Posted Image

3. To set the direction of the flow click a waypoint at the end of the river; at the bottom to let the water flow north, at the upper end of the river to let it flow down the map.
4. Click the 'River' button in the Water Options. If you don't like the result undo steps #4 and #3, choose another waypoint and click the 'River' button again.
Posted Image

5. Fine tune the river.
Posted Image

_______________________________________________________________________________

The water appearance can be changed by using textures for the river bank and by applying different settings for the water in map.ini.

WaterTransparency
  TransparentWaterMinOpacity = 0.8   ;opacity of water at maximum depth - 1.0 is opaque, 0 transparent.
  TransparentWaterDepth = 2.0       ;depth below water surface at which it becomes opaque (unless clipped by TransparentWaterMinOpacity)
  StandingWaterTexture = TSWater03.tga
  ;StandingWaterColor = R:0 G:50 B:0
  ;StandingWaterColor = R:100 G:150 B:100
  StandingWaterColor = R:50 G:75 B:50
  ;AdditiveBlending = Yes
  RadarWaterColor = R:100 G:196 B:100
End
Quote

Crazykenny's Photo Crazykenny 17 Mar 2008

Thanks Nip, this should come in handy. But the thing is... the flow graphics suck so much I'm probably not gonna use it :P
Quote