UVW
Zhao 05 Dec 2009
Oops Ment UVW D: its a bad habit.
I was following screaming crickets tutor on how to UVW a object so I was ready to skin it, and I ran into some problems . He said in his tutor to not attach anything to X part of model like Tires or other gun turrets so i didn't , i got the UVW thing for the model I made and I got this
used Collasp all , as said in tutor and then clicked the other Object.
But when i did it with this object it didnt add toward the other one
i want it all to be together but i dont know how
i used pictures , because i fail at explaining
Edited by Zhao, 05 December 2009 - 07:10.
I was following screaming crickets tutor on how to UVW a object so I was ready to skin it, and I ran into some problems . He said in his tutor to not attach anything to X part of model like Tires or other gun turrets so i didn't , i got the UVW thing for the model I made and I got this
used Collasp all , as said in tutor and then clicked the other Object.
But when i did it with this object it didnt add toward the other one
i want it all to be together but i dont know how
i used pictures , because i fail at explaining
Edited by Zhao, 05 December 2009 - 07:10.
Sgt. Rho 05 Dec 2009
select the faces you want to unwrap, hit "planar", "box" or whatever, then the "angle" (X,Y,Z) and then move and resized it on the UVW.
Pav:3d 05 Dec 2009
In order to UV you need to understand what UV unwrapping is. It is a jigsaw puzzle of every face/side on your model. By UV-ing you are telling the model where you want the texture/skin to be.
- Attach everything (you can remove parts later, also this helps if you are skinning everything on one texture)
- Delete any duplicated pieces (IE Wheels, parts you are going to skin the same anyway) and leave one of the pieces to be duplicated, you can unwrap it and then just duplicate it afterwards (saves you unwrapping 8 wheels for instance)
- Modifiers -> UV Co-ordinates -> Unwrap UVW
- (In the "Edit UVWs box") Select all the UV's (they should all be red now)
- Mapping -> Flatten Mapping -> OK
- Now everything is all flattened out infront of you, all the sides of the model. You can probably make out a few distinct shapes that look like part of your model.
- Any face you select in the Edit UVW's window will turn red in the main viewport
- Now you can start putting together pieces in separate parts, you can put them anywhere you want when you are working on them, but when you have finished you must put them all within that blue box (the thick blue lines) (unless you are doing repeated textures, but this is something to do when you understand how to unwrap more)
- When you have finished and want to detach different pieces (IE, wheels, guns, turrets, etc) make sure to right click and COLLAPSE ALL on the Unwrap UVW modifier, otherwise the UV map will re-set when you detach something and it wont work.
- Duplicate the duplicates you deleted earlier, and you will notice they will all have the same unwrap
Im going to do a proper tutorial one day
Edited by Pav3d, 05 December 2009 - 12:48.
- Attach everything (you can remove parts later, also this helps if you are skinning everything on one texture)
- Delete any duplicated pieces (IE Wheels, parts you are going to skin the same anyway) and leave one of the pieces to be duplicated, you can unwrap it and then just duplicate it afterwards (saves you unwrapping 8 wheels for instance)
- Modifiers -> UV Co-ordinates -> Unwrap UVW
- (In the "Edit UVWs box") Select all the UV's (they should all be red now)
- Mapping -> Flatten Mapping -> OK
- Now everything is all flattened out infront of you, all the sides of the model. You can probably make out a few distinct shapes that look like part of your model.
- Any face you select in the Edit UVW's window will turn red in the main viewport
- Now you can start putting together pieces in separate parts, you can put them anywhere you want when you are working on them, but when you have finished you must put them all within that blue box (the thick blue lines) (unless you are doing repeated textures, but this is something to do when you understand how to unwrap more)
- When you have finished and want to detach different pieces (IE, wheels, guns, turrets, etc) make sure to right click and COLLAPSE ALL on the Unwrap UVW modifier, otherwise the UV map will re-set when you detach something and it wont work.
- Duplicate the duplicates you deleted earlier, and you will notice they will all have the same unwrap
Im going to do a proper tutorial one day
Edited by Pav3d, 05 December 2009 - 12:48.
Gen.Kenobi 05 Dec 2009
Zhao 05 Dec 2009
i select all the UVW thingys and the mapping -> flatten texture is disabled
is it ok if i move the faces around?
Edited by Zhao, 05 December 2009 - 14:14.
is it ok if i move the faces around?
Edited by Zhao, 05 December 2009 - 14:14.
Pav:3d 05 Dec 2009
Make sure you expand the UVW modifier and select "Face"
And yes thats the whole idea that you move them where ever so theyre all properly aligned n ready for skinning
And yes thats the whole idea that you move them where ever so theyre all properly aligned n ready for skinning
Zhao 11 Dec 2009
Its kind of hard since 2010 and 3ds max 8 are a little different so yeah. D:
I don’t get that white menu any more :(
I don’t get that white menu any more :(