0
Veers Models
Started By GeneralMVeers, Jan 11 2008 12:46
63 replies to this topic
#51
Posted 23 December 2008 - 05:18
Heres about 20 mins more of work on it
#52
Posted 23 December 2008 - 05:48
0_0 stil no comments oh well its late that could be why
more wip
more wip
#53
Posted 26 December 2008 - 04:10
Well heres more work on my frigate
since it seams most people have no idea what it is maby I should explain, its basically the light craft of the unsc from halo, the top deck like part is what is called a "mac gun" witch is litteraly magnetic exceleration cannon, it basically launches 700 ton tungston rods at ships at nearly ten times the speed of sound all though it is the size of say a modern day battleship its actually the smallest ship in the unsc fleets.
Heres all its specs if that explanation is not enough for you http://halo.wikia.co...ki/UNSC_Frigate
since it seams most people have no idea what it is maby I should explain, its basically the light craft of the unsc from halo, the top deck like part is what is called a "mac gun" witch is litteraly magnetic exceleration cannon, it basically launches 700 ton tungston rods at ships at nearly ten times the speed of sound all though it is the size of say a modern day battleship its actually the smallest ship in the unsc fleets.
Heres all its specs if that explanation is not enough for you http://halo.wikia.co...ki/UNSC_Frigate
#54
Posted 26 December 2008 - 11:18
good job so far.
it's time to wake up
#55
Posted 30 March 2010 - 02:45
Hmm thought I would revive this thread, seeing pavs awsome M93R reminded me of something I made ages ago for someone, I honestly cant remember what it was for but its an HK416, basically H&K's touch up to the m-4s flaws
Just noticed there is no trigger , I may have to find time to finish it some day.
Just noticed there is no trigger , I may have to find time to finish it some day.
Edited by GeneralMVeers, 30 March 2010 - 03:41.
#56
Posted 30 March 2010 - 05:14
Tad rough in the back.
If I recall, Colt tried to sue H&K for naming their weapon akin to a Colt product.
If I recall, Colt tried to sue H&K for naming their weapon akin to a Colt product.
[ER-Dev] Kalo Shin [USA]: The only thing I could do in safe mode
[ER-Dev] Kalo Shin [USA]: Is browse my porn photos
[ER-Dev] Kalo Shin [USA]: GUESS WHAT I'VE BEEN DOING ALL DAY
[ER-Dev] Kalo Shin [USA]: GIGGITY.
#57
Posted 30 March 2010 - 12:35
Colt sued when it was called the HKM4, that's why it's the 416, IIRC. On the model:
Pistol grip is really blocky, should be rounder and thinner.
STANAG just looks off, try looking at more reference pictures on that.
Dust cover extrudes to cover the bolt, doesn't intrude.
Stock is too blocky, and too thick on the bottom.
Flash hider should be a birdcage.
I *believe* that your sights are kinda off, but I'm not really sure on that.
Magwell doesn't have that line dividing it in half, thats were the HK trades are.
Magazine release is off. Look at more reference, I think.
I think that's it...
Pistol grip is really blocky, should be rounder and thinner.
STANAG just looks off, try looking at more reference pictures on that.
Dust cover extrudes to cover the bolt, doesn't intrude.
Stock is too blocky, and too thick on the bottom.
Flash hider should be a birdcage.
I *believe* that your sights are kinda off, but I'm not really sure on that.
Magwell doesn't have that line dividing it in half, thats were the HK trades are.
Magazine release is off. Look at more reference, I think.
I think that's it...
kinda, sorta alive.
#59
Posted 30 March 2010 - 13:33
Yeah, RIS's are very blocky. Again, reference pictures will do you wonders. That's one I shouldn't have missed, too .
kinda, sorta alive.
#60
Posted 30 March 2010 - 17:29
Ok thanks for those points, went an made some changes, im sure its not 100% perfect but they never are , I think I might skin this if I find the time.
#62
Posted 30 March 2010 - 17:32
Damit, you know what I knew that too, and I forgot to change that b4 I rendered it hmm XD
#63
Posted 30 March 2010 - 22:46
That is a large grip...
[ER-Dev] Kalo Shin [USA]: The only thing I could do in safe mode
[ER-Dev] Kalo Shin [USA]: Is browse my porn photos
[ER-Dev] Kalo Shin [USA]: GUESS WHAT I'VE BEEN DOING ALL DAY
[ER-Dev] Kalo Shin [USA]: GIGGITY.
#64
Posted 31 March 2010 - 01:39
Better, definitely. Not quite there yet .
Ok:
Rails are flat on the top, not rounded, with sharp edges on either side.
Pistol grip is still too big and bulky.
That front sight wouldn't be able to flip down, so somethings wrong, but I'm not entirely sure what.
Area were buttpad meets the rest of stock should be smooth.
Reciever is too thick, as is the magazine, which still looks off.
Upper and lower recievers need to be more clearly defined.
Magazine release is still totally off.
Bottom of stock is too blocky.
Forward assist doesn't look anything like the real thing...
Charging handle is too close to the stock, should extrude from the upper.
Lots of little things, but it's looking good.
Ok:
Rails are flat on the top, not rounded, with sharp edges on either side.
Pistol grip is still too big and bulky.
That front sight wouldn't be able to flip down, so somethings wrong, but I'm not entirely sure what.
Area were buttpad meets the rest of stock should be smooth.
Reciever is too thick, as is the magazine, which still looks off.
Upper and lower recievers need to be more clearly defined.
Magazine release is still totally off.
Bottom of stock is too blocky.
Forward assist doesn't look anything like the real thing...
Charging handle is too close to the stock, should extrude from the upper.
Lots of little things, but it's looking good.
kinda, sorta alive.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users